The decorator pattern, also known as the wrapper pattern, is when you wrap an object within another object, thus providing a means of enhancing or overriding certain behavior. The wrapper object will delegate any incoming method calls to the original object, unless it defines a new method to enhance or replace the original object’s behavior. By using the decorator pattern, you can dynamically create as many decorated objects as you want, each enhancing the behavior of the original object in a unique way — and all without mutating the original object. In this manner, you can effectively add, remove, or extend behaviors at runtime.
Now, assume one also desires the ability to add borders to windows. Again, the original Window class has no support. The ScrollingWindow subclass now poses a problem, because it has effectively created a new kind of window. If one wishes to add border support to many but not all windows, one must create subclasses WindowWithBorder and ScrollingWindowWithBorder etc. This problem gets worse with every new feature or window subtype to be added. For the decorator solution, we simply create a new BorderedWindowDecorator—at runtime, we can decorate existing windows with the ScrollingWindowDecorator or the BorderedWindowDecorator or both, as we see fit. Notice that if the functionality needs to be added to all Windows, you could modify the base class and that will do. On the other hand, sometimes (e.g., using external frameworks) it is not possible, legal, or convenient to modify the base class.
Here we ensure that the key student_id is part of the request. Although this validation works, it really does not belong in the function itself. Plus, perhaps there are other routes that use the exact same validation. So, let’s keep it DRY and abstract out any unnecessary logic with a decorator. The following @validate_json decorator will do the job:
The decorator pattern is a design pattern that allows you to wrap an object such that it will appear to execute a given behavior in many different ways at different points in program execution. This is especially useful when you want an object to have different behaviors at but are unable to mutate the object. The decorator pattern is a useful way to implement dynamic behavior without needing an extended inheritance-based class hierarchy. To use the decorator pattern you need four elements: a component interface; a concrete component; a decorator abstraction; and, a concrete decorator. The interface sets the contract for both component and decorator behavior, the decorator abstraction contains a pointer to some concrete component, and the concrete decorators wrap a concrete component and override behavior if desired.

The discussion continued on and off on python-dev from February 2002 through July 2004. Hundreds and hundreds of posts were made, with people proposing many possible syntax variations. Guido took a list of proposals to EuroPython 2004 [7], where a discussion took place. Subsequent to this, he decided that we'd have the Java-style [10] @decorator syntax, and this appeared for the first time in 2.4a2. Barry Warsaw named this the 'pie-decorator' syntax, in honor of the Pie-thon Parrot shootout which occurred around the same time as the decorator syntax, and because the @ looks a little like a pie. Guido outlined his case [8] on Python-dev, including this piece [9] on some of the (many) rejected forms.
Fresco is any of several related mural painting types, done on plaster on walls or ceilings. The word fresco comes from the Italian word affresco [afˈfresːko], which derives from the Latin word for fresh. Frescoes were often made during the Renaissance and other early time periods. Buon fresco technique consists of painting in pigment mixed with water on a thin layer of wet, fresh lime mortar or plaster, for which the Italian word for plaster, intonaco, is used. A secco painting, in contrast, is done on dry plaster (secco is "dry" in Italian). The pigments require a binding medium, such as egg (tempera), glue or oil to attach the pigment to the wall.
Modernism describes both a set of cultural tendencies and an array of associated cultural movements, originally arising from wide-scale and far-reaching changes to Western society in the late 19th century and early 20th century. Modernism was a revolt against the conservative values of realism.[26][27] The term encompasses the activities and output of those who felt the "traditional" forms of art, architecture, literature, religious faith, social organization and daily life were becoming outdated in the new economic, social and political conditions of an emerging fully industrialized world. A salient characteristic of modernism is self-consciousness. This often led to experiments with form, and work that draws attention to the processes and materials used (and to the further tendency of abstraction).[28]
The Crowne Plaza London Kings Cross has recently completed its exciting journey to emerge as the newest Crowne Plaza hotel in London following a multi-million pound refurbishment and re-branding from Holiday Inn. Our hotel has 429 newly designed bedrooms, the first franchised Belgo Restaurant and the Bloom Bar & Kitchen, which opened a few months ago. The hotel also has 6 state of the art Meeting & Event spaces, a Club Lounge and a Leisure Club. A new opportunity has arisen for the position of Maintenance Shift Engineer. This position would suit a multi-skilled, hands-on, motivated and hard-working individual looking to develop. A person should be adaptable, flexible and able to work both independently and with the team. Experience within the hotel industry and Maintenance/Engineering is desirable but not critically essential. Ideally the candidate will have electrical, mechanical, carpentry, plumbing and decorating/tiling skills and a reasonable working knowledge of stringent PPM of automated plant equipment and general building maintenance. A good level of English is essential. Key responsibilities -Report to the Maintenance Supervisor before your shift starts to go through your daily tasks. -Promptly and efficiently attends and inspects all maintenance requests, defects or Health & Safety matters su
None of these alternatives gained much traction. The alternatives which involve square brackets only serve to make it obvious that the decorator construct is not a list. They do nothing to make parsing any easier. The '<...>' alternative presents parsing problems because '<' and '>' already parse as un-paired. They present a further parsing ambiguity because a right angle bracket might be a greater than symbol instead of a closer for the decorators.
This decorator works by storing the time just before the function starts running (at the line marked # 1) and just after the function finishes (at # 2). The time the function takes is then the difference between the two (at # 3). We use the time.perf_counter() function, which does a good job of measuring time intervals. Here are some examples of timings:
You saw that, to define a decorator, you typically define a function returning a wrapper function. The wrapper function uses *args and **kwargs to pass on arguments to the decorated function. If you want your decorator to also take arguments, you need to nest the wrapper function inside another function. In this case, you usually end up with three return statements.
Digital painting is a method of creating an art object (painting) digitally and/or a technique for making digital art in the computer. As a method of creating an art object, it adapts traditional painting medium such as acrylic paint, oils, ink, watercolor, etc. and applies the pigment to traditional carriers, such as woven canvas cloth, paper, polyester etc. by means of computer software driving industrial robotic or office machinery (printers). As a technique, it refers to a computer graphics software program that uses a virtual canvas and virtual painting box of brushes, colors and other supplies. The virtual box contains many instruments that do not exist outside the computer, and which give a digital artwork a different look and feel from an artwork that is made the traditional way. Furthermore, digital painting is not 'computer-generated' art as the computer does not automatically create images on the screen using some mathematical calculations. On the other hand, the artist uses his own painting technique to create the particular piece of work on the computer.[25]

You saw that, to define a decorator, you typically define a function returning a wrapper function. The wrapper function uses *args and **kwargs to pass on arguments to the decorated function. If you want your decorator to also take arguments, you need to nest the wrapper function inside another function. In this case, you usually end up with three return statements.
The container must inject a delegate object to the delegate injection point. The delegate object implements the delegate type and delegates method invocations to remaining uninvoked decorators and eventually to the bean. When the container calls a decorator during business method interception, the decorator may invoke any method of the delegate object.
This wrapper_repeat() function takes arbitrary arguments and returns the value of the decorated function, func(). This wrapper function also contains the loop that calls the decorated function num_times times. This is no different from the earlier wrapper functions you have seen, except that it is using the num_times parameter that must be supplied from the outside.
- [John] When digital artists create expressive art, they tend to reach for a Corel Painter. Painter has a 27-year history of advancing what is possible on the digital canvas and continues to forge new ground. The latest 2019 edition featured here takes a short breather from brush-related features and concentrates on usability and workflow with a complete interface redesign. We'll highlight the new interface by taking on the assignment of creating five travel posters celebrating the great state of California.
Aesthetics is the study of art and beauty; it was an important issue for 18th- and 19th-century philosophers such as Kant and Hegel. Classical philosophers like Plato and Aristotle also theorized about art and painting in particular. Plato disregarded painters (as well as sculptors) in his philosophical system; he maintained that painting cannot depict the truth—it is a copy of reality (a shadow of the world of ideas) and is nothing but a craft, similar to shoemaking or iron casting.[9] By the time of Leonardo, painting had become a closer representation of the truth than painting was in Ancient Greece. Leonardo da Vinci, on the contrary, said that "Italian: La Pittura è cosa mentale" ("English: painting is a thing of the mind").[10] Kant distinguished between Beauty and the Sublime, in terms that clearly gave priority to the former.[citation needed] Although he did not refer to painting in particular, this concept was taken up by painters such as J.M.W. Turner and Caspar David Friedrich.